Barco ICON H250/400 R9010510 - Manual (Page 18)

4. Installation
Lens Length of projector
CLD (1.2-1.6:1) 530 mm
CLD (1.6-2.4:1) 525 mm
CLD (2.4-4.3:1) 550 mm
QCLD (1.1-1.3:1) 580 mm
QCLD (0.85:1) 610 mm
4.1 Battery installation in the RCU
How to install the battery
Two batteries are packed together with the RCU. Before using your RCU, install first these batteries.
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU.
4. Put the battery cover on its place.
How to replace the batteries in the RCU
To replace the batteries :
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the battery towards the - side
4. Lift up the battery at the same time.
5. Repeat for the second battery.
6. Insert the batteries as indicated in the RCU (battery type AA or LR6 or equivalent).
7. Put the battery cover on its place.
Image 4-2
12 R5976992 ICON H250/400 13/12/2006