Billion Electric Company BiPAC 8501/8521 - Manual (Page 166)

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
Chapter 4: Configuration
162
From the example, 0/40 is used for data/internet and with the assumption that PPPoE is used;
click the Edit button to change the VPI/VCI to 0/40.
Click Create to setup up an additional WAN interface for video applications. A total of 8 VLAN is
supported; therefore, only 8 WAN interfaces can be created in the table.
From the example, PVC 0/33 to 0/39 is assigned to video using 1483 Bridged mode. Check
RFC 1483 Bridged and click Next to continue the setup.
Enter 0 for VPI and 33 for VCI in their respective blanks provided. Select an appropriate ATM
Class, Encapsulation Method, Acceptable Frame Type and Filter Type from their drop down
menus and enter the correct PVID for Untagged Frames in the blank. When all information has
been entered, press Apply to save changes.
• VPI and VCI: Enter the information provided by your ISP.
• ATM Class:
The Quality of Service for ATM layer.
• Encapsulation method: Select the encapsulation format, this is provided by your ISP.