Billion Electric Company BiPAC 8501/8521 User Manual
Page 77
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
Chapter 4: Configuration
73
• 4-Wired Connection: BiPAC 8521 supports 3 types of SHDSL.bis connection: Standard,
False & Enahnced. Select the type of SHDSL.bis connection from the 4-wired
connection drop down menu, then select Apply to activate the configuration page.
Note: When select 2-wire mode, only Port 1 settings need to be configured and the SHDSL
(RJ-11 cable) must be connected to LINE 1 on the back of the device.
• Mode: The SHDSL.bis device can function as a CPE (Customer Premises Equipment) or
CO (Central Office). Select CPE mode when the BiPAC 8521 is connected to your ISP.
• Back – to –back: it is a direct connection between two SHDSL.bis devices with one
being set to CPE and the other is set to CO by using a standard RJ-11 telephone cable.
• Annex Type: It is the DSL operating mode standard. Select Annex A or Annex B to
support up to 5.7Mpbs (for 2-wired mode) and 11.4Mpbs (for 4-wired mode). Select other
annex such as Annex B_ANFP / Annex A_B_ANFP, you may consult with your ISP first.
• Back – to –back: to be sure the Annex type is the same on the BiPAC 8521 and the
remote router.
• Bit Rate Mode: The mode selections are Adaptive and Fixed. Selecting the Adaptive
mode, the best connection rate will be automatically negotiated with the CO / ISP.
Selecting the Fixed mode, the connection rate will be fixed to the specific fixed bit rate
selected with the CO / ISP.
• Fixed Bit Rate: Specify the fix transfer rate when Fixed Mode is selected. Specify the
maximum transfer rate when Adaptive Mode is selected. Bit Rate range is from 200kbps
~ 5704kbps.
• Activate Line: Line active true is set by default. Select false to disable and true to
enable SHDSL.bis connection.
Note: Once Active Line is selected as false, you must enable the Active Line to true again and
click the Apply button to reactivate SHDSL.bis connection.
• DSP FirmwareVersion: Display the SHDSL line code firmware version.
• Connected: Display current SHDSL line sync status.
• State: Display current SHDSL line status.
• Bit Rate: Display SHDSL line synch speed rate.
Click Apply button to apply your changes