Billion Electric Company BiPAC 8501/8521 - Manual (Page 167)

Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
Chapter 4: Configuration
163
• Acceptable Frame Type: Specify what kind of traffic can pass through this connection,
whether all traffic or only VLAN tagged traffic.
• Filter Type: Specify the type of Ethernet filtering performed by the named bridge
interface.
All Allows all types of ethernet packets through the port.
Ip Allows only IP/ARP types of ethernet packets through the port.
Pppoe Allows only PPPoE types of ethernet packets through the port.
• PVID for Untagged Frames: PVID is known as Port VLAN Identifier. When an untagged
packet is received by the input port(s), this packet will be tagged with a specific PVID.
From the example, only VPI and VCI sections need to be filled in and leave the rest of the
section as it is. Repeat the same procedure by clicking Create
select RFC1483 Bridged
fill-in the rest of the PVC 0/34 to 0/39.
Step 3: Setup VLAN Service
Go to Configuration Advanced VLAN Bridge
DefaultVlan lists all its member ports. It is necessary to group specific member ports for each
VLAN.
From the example, two VLAN groups are requested: Data and Video.
To create another VLAN group for Video click Create VLAN.
Give a name and ID (PVID) to identify the Video group. The valid value range for PVID is 1 ~
4094.