Figure a-2: shock mounting, Oil separator tank assembly, Figure a-3: separator tank mounting bracket – Hale SMR-U User Manual
Page 39
SM R -AC In s talla tio n a n d Se tu p
❑
53
Addendum - SMR-AC CAFSPro Installation Guide
p/n: 029-0020-78-0
Whether mounting directly to the chas-
sis, or constructing a separate bracket,
accepted brackets must be used.
Shock absorption is provided and must
be included in any mounting modifica-
tion. (See Figure A-2: “Shock Mount-
ing.”)
All mounting brackets must be con-
structed from structural angled steel,
having minimum dimensions of 4” x 36”
x 1/2” (102 x 914 x 13 mm). Use mini-
mum 5/8”, Grade 8 bolts with flat
washers and lock nuts.
Installation diagrams are located at the back of this manual to assist with
overall dimensions and clearances required for the various mounting config-
urations. Also see Section “ Drawing Package” beginning on page 67.
Oil Separator Tank Assembly
Mount the oil separator tank assembly at a convenient and accessible loca-
tion, enabling a clear view of the oil level sight gauge and oil fill cap. (See
Figure A-3: “Separator Tank Mounting Bracket.”).
Figure A-3: Separator Tank Mounting Bracket
Figure A-2: Shock Mounting