Hale SMR-U - Manual (Page 42)

❑ SMR-AC Installation and Setup
56 Addendum - SMR-AC CAFSPro Installation Guide
p/n: 029-0020-78-0
A.4 OIL SEPARATOR TANK
For a general overview of the oil separator tank connection, see Section
“Drawing Package” on page 67. (See Figure A-6: “Separator Tank Installa-
tion Overview.”)
Figure A-6: Separator Tank Installation Overview
The following connections are made by the system builder/installer:
❑ (#1) Compressor discharge air / oil mixture to oil separator tank INLET.
Use 1-1/2” (38 mm), wire reinforced hose. For example, Aeroquip
FC350-24. (See Figure A-6: “Separator Tank Installation Overview.”)
❑ (#2) Oil separator tank DISCHARGE to CAFSPro manifold (air INLET).