Fluid Management X-Smart - Manual (Page 15)

Operator manual X-Smart V. 0.0
15
3.2.3 Placing a can
1. Place the can (A) at the centre of the mark (B) on the can
table.
3.2.4 Using the emergency stop
1. Push the emergency stop (A). The machine stops
immediately.
2. Solve the problem as quickly as possible.
3. Reset the emergency stop by turning the emergency stop.
The machine restarts automatically.
A
B
Note
Make sure that the can sensor is able to
detect the can.
CAUTION
Make sure that the can does not touch the
turntable.
A
1
2
CAUTION
Only push the emergency stop in the case of
a safety emergency. Never use the
emergency stop as an on/off function!
CAUTION
When the machine is shut down, the stirring
mechanism, which is necessary to keep the
colorant in optimal condition, is also shut
down.
Note
When the machine is operational, you hear a
’beep’ sound twice.