Fluid Management X-Smart - Manual (Page 19)

Operator manual X-Smart V. 0.0
19
3.3.4 Refilling a canister
1. In the software program, activate the fill canister option.
2. Remove the lid of the canister (A).
3. Follow the instructions on the display.
4. Add the correct colorant (B). Do not spill.
CAUTION
Make sure that the colorant level in the canister is correct. If a canister is empty, this can cause an
inaccurate dispensing and/or a recipe fault.
Note
The software program checks the level of colorant in each canister. The software program shows
when you need to refill a canister.
A
B
2
1
Note
The turntable turns the correct canister to
the front.
CAUTION
Do not fill the canister to the brim. Leave at
least 2 cm unfilled.