Fluid Management X-Smart - Manual (Page 7)

7
Safety X-Smart V. 0.0
2 Safety
2.1 Intended use
The machine is designed to dispense colorants into a can. Any other use of the machine is strictly forbidden.
2.2 Liability
Fast & Fluid Management B.V. is not liable if you do not follow the rules below:
-
The machine is for indoors use only.
- This machine may only be used for commercial settings. The machine is not a household appliance.
- Do not use a damaged machine. When you have doubts, contact your supplier or the service department of
Fast & Fluid Management B.V. See www.fast-fluid.com.
- Install and connect the machine according to the instructions on the installation instructions sheets.
- Observe all local safety regulations.
- Connect the machine to a grounded wall socket.
- Keep the machine in good condition. Make sure that defective parts are immediately replaced.
- Close the covers and make sure that all the panels are fitted.
- Replace parts only with original Fast & Fluid Management B.V. spare parts.
All maintenance beyond the scope of this manual must be carried out by a qualified service technician that Fast
& Fluid Management B.V. has trained and certified.
2.3 User qualification for installation
Only install the machine if you have written permission from the supplier of the machine.
2.4 Certifications
2.4.1 CE certification
The machine is CE certified. This means that the machine complies with the essential requirements concerning
safety and hygiene. The directives that have been taken into consideration in the design are available on
www.fast-fluid.com .
WARNING
Read the manual before you install or use the machine. Failure to do so can result in personal
injury, death or property damage.
WARNING
Do not place any object on top of the machine.
- The turntable moves and objects placed on the machine will fall off. This could lead to damage
of the machine or personal injury.
- The machine cannot bear objects that are too heavy. This could lead to damage of the machine.