Fluid Management X-Smart - Manual (Page 23)

Troubleshooting X-Smart V. 0.0
23
5 Troubleshooting
5.1 Contact service
1. Find the type plate on the rear of the machine. See § 3.1.5.
2. Take a note of the model number and the serial number of the
machine.
3. Contact your supplier or manufacturer. See www.fast-
fluid.com .
5.2 Troubleshooting guide
Note
For all error messages on the computer: see the help topic in the software.
Problem Possible cause Possible solution
Main power supply is
present but the machine
does not work. Emergency stop is active. Reset the emergency stop. See § 3.2.4.
A fuse is broken. Contact service. See § 5.1.
The machine has a failure
and does not react correctly
to the request from the
software program. The failure could be mechanically
or electronically. Push the emergency stop to reset the
machine. Reset the emergency stop. See
§ 3.2.4.
If the machine still has a failure, contact
service. See § 5.1.