Fluid Management X-Smart - Manual (Page 5)

5
About this manual X-Smart V. 0.0
1 About this manual
The manual shows the information necessary to:
-
do the commissioning
- operate the machine
- perform basic maintenance
- correct small problems.
The X-Smart and all its versions are referred to in the manual as the ’machine’.
This manual contains the original instructions. The original language of the manual is English.
1.1 How to work with the manual
1. Familiarize yourself with the structure and content.
2. Read the safety chapter in detail and make sure you understand all the instructions. See § 2.
3. Carry out the actions completely and in the given sequence.
1.2 Record of changes
/i
Note
For the unpacking and installation procedures, refer to the separate installation
instruction sheets.
Edition Editor Check Date Description
1.0 ET 01/2013 First edition