ARB RD90 - Manual (Page 7)

1 Introduction
5
1.3 Assembly Type Identification
IMPORTANT:
Sections 2 and 3 of this installation guide have been written to
accommodate two different styles of Toyota IFS differential housings:
A the front accessed type with bearing caps (Refer to Fig.1.)
B the ‘clamshell’ type split housing (Refer to Fig.2.)
To eliminate confusion, you should identify which figure your vehicle
matches with. The section numbers within the guide that refer to the
front accessed type have been suffixed with an ‘
A ’, and those that
refer to the ‘clamshell’ type have been suffixed with a ‘ B ’.
PLEASE IGNORE ALL SECTIONS WHICH
DO NOT APPLY TO YOUR APPLICATION
Figure 1.
Figure 2.
A
B