ARB 3520030 - Manual (Page 4)

Last Rev Date: 18/07/11 Page 4 of 15 Fitting instructions# 3787968
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
FITTING PROCEDURE
1. Remove protective plate if fitted
2. Remove front fasteners only from stone tray.
Retain fasteners for reuse.
3. Remove lower bumper fixing screws and
screws in wheel arch area
4. Remove grille. Screws are located in tabs at
top of grille. Once these are removed
carefully release clips some are located along
the inside lower section.