ARB 3432120 - Manual (Page 8)

21/05/07 Page 8 of 8 3783040
17.
17 Re-connect the fog lamp harness on both sides of the
vehicle .
The turn signal is supplied with a loom kit , this is
plugged in to the turn signal one end and spliced into
the vehicles original wiring at the other end .
Cable tie both the turn signal and fog lamp wiring
where appropriate .
Ensure the turn signal & fog lamps are working
correctly .
Reconnect the head lamp washer tubes on both sides.
18.
18 Trim the plastic inner guard liners by aligning with
the bull bar and using the hole in the wing as a
guide , drill a 6 mm hole and secure with the M6
hardware supplied .