ARB 3432150 User Manual
Warning, Land rover discovery 3 arb bull bar and winch bar
19-03-08
Page 1 of 18
3783182
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
LAND ROVER DISCOVERY 3
ARB BULL BAR AND WINCH BAR
• PART No 3432150 DISCOVERY 3 WINCH BAR
• PART No 3232150 DISCOVERY 3 BULL BAR
WARNING
FOR VEHICLES EQUIPPED WITH SRS AIRBAG
WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT
PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS
USING ONLY THE HARDWARE SUPPLIED.
• IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT, CONTACT YOUR
NEAREST AUTHORISED ARB STOCKIST. REPAIRS OR MODIFICATIONS TO THE
IMPACT ABSORPTION SYSTEM MUST NOT BE ATTEMPTED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN
THOSE SPECIFIED BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
TOOLS REQUIRED :- METRIC 3/8 DRIVE SOCKET SET, METRIC RING AND OPEN ENDED SPANNERS,
TORX BIT SET, PHILLIPS AND FLAT SCREWDRIVERS, KEY HOLE SAW, DRILL AND 8 &10 mm DRILL BIT ,
SHARP KNIFE AND A WHITE PAINT MARKER .