ARB 3432150 - Manual (Page 13)

19-03-08 Page 13 of 21 3783182
BULL BAR SETUP
37. Replace the small section of hose that
runs between the headlight washers with
the hose supplied in the fitting kit.
38. Run the hose through the bull bar to both
headlight washers.
39. Fit the fog light loom to the fog light and fit
the washer hose to the headlight washer.
Cable tie the head light loom and the
washer hose together making sure they
are away from sharp edges.
WINCH FITMENT
IF NOT FITTING A WINCH GO TO STEP 47
40. If fitting a Warn winch, replace the three
cables in the control box marked A, F1
and F2 with the three 850mm cables from
the fitting kit. Mark the new cables as per
the original cables.
Replace hose
This hole can be used
to clip the wiring loom
to the bracket