Vehicle preparation – ARB 3432150 User Manual
Page 4
Advertising
19-03-08
Page
4
of
21 3783182
VEHICLE PREPARATION
1. Remove the grill and then the headlights
from the vehicle.
2. Remove the flares from the vehicle.
3. Remove the bumper bar from the vehicle.
4. Remove the two bolts attaching the
bumper cross bar to the washer bottle.
5. Remove the inside plastic brackets and
brake off the inside sections of the outer
plastic brackets.
6. On air suspension models, remove the
solenoid pack attached to the right hand
side of the crossbar.
7. Remove the crossbar from the vehicle.
Remove this
section from both
outside brackets
Advertising