ARB 3450120 - Manual (Page 11)

29/8/05 Page 11 of 12 3783172
36. Fit washer bottle / horn guards to bar &
vehicle using 6mm hardware.
M6x20 bolts, M6 flat washers, M6 flange nuts
M6x20 bolts, M6 spring washers, M6 flat
washers
M6x20 bolts, M6 flat washers, M6 flange nuts
37. Next step is to trim the plastic inner
guards that hang down past the bar.
Cut plastic level with the bottom of bar wing
section to washer bottle guard.
Bar wing section