ARB 3438260 - Manual (Page 18)

Last Rev Date: 26/6/2009 Page 18 of 18 Fitting instructions# 3787027
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
ONCE BAR IS FITTED:
♦ Ensure all bolts are tensioned correctly
♦ All wiring is clear of sharp edges or moving surfaces and secured
properly
♦ Piping is secured well away from sharp or moving components
♦ Check operation of winch if fitted
♦ Check all wiring and turn signal lamps are functioning correctly
FITTED PRODUCT