Preparation to vehicle – ARB 3438260 User Manual

Page 7

Advertising
background image

Last Rev Date: 26/6/2009

Page 7 of 18

Fitting instructions# 3787027

Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd

PREPARATION TO VEHICLE

15. Remove tow hook and set aside






16. Remove the bracket holding the power

steering pipe

17. Mark out a hole 20mm (3/4”) up from the

original upper hole

18. Drill out to same diameter as upper hole as

shown

19. Then flatten tab.

20. Touch up bare surfaces with rust preventing

paint.

21. Pull up pipe and refit bracket as shown

Advertising
This manual is related to the following products: