ARB 3952010 - Manual (Page 4)

22/06/06 Page 4 of 9 3782946
4. Remove the bumper from the vehicle.
5. Fasten the mount brackets and tow hooks to the
end of the chassis rails using M10 bolts, M10 flat
washers and M10 spring washers.
Tow hooks
6. The mounts need to be pin bolted to the vehicle
chassis.
Mark out the hole 50mm across to the outside and
15mm forward and drill using a 10mm drill bit. Drill
all the way through the top of the bracket and cross
member. Be careful not to damage the radiator
above the cross member.
Fasten hole using M10 bolts, M10 flat washers and
M10 spring washers.