ARB 3952010 - Manual (Page 8)

22/06/06 Page 8 of 9 3782946
16. Bolt the air deflector to the underside of the bar
and chassis cross member using M8 bolts, M8 flat
washers and M8 spring washers.
17. If fitting with winch.
Feed the winch cable through the roller fair lead.
Mount the hook to the end of the cable.
18. Glue the light surrounds to the bar using a silicone
based rubber adhesive. Run the bead along the
cavity on the rear side of the part. Position the
surround to align the inside edge with the buffer
and concentric to the light.
Wipe off any adhesive on the front face of the bar.
Allow adhesive to cure before continuing.