GrimmSpeed 02-07 WRX/STi/Impreza Hood Struts - Manual (Page 5)

9. Lastly, lift your hood off of its prop and push the empty end of the strut down
onto the stainless ball stud. With a little bit of pressure, it should pop right
on. After it’s fully seated, push the small metal clip back into its original
position. Repeat on both sides.
Figure 9: Complete installation.
10. Now go ahead and install the GrimmSpeed branding tags in your desired
location! Simply removing the backing and apply with firm pressure.
Figure 13: Loosen lower hood hinge bolt.
Seat ball and socket