GrimmSpeed Alternator Cover - Manual (Page 4)

5. Next, use the longer bolt and the smaller washer to assemble the passenger
side as shown.
Bolt  Small Washer  Cover  Long Standoff  Factory Bracket
Figure 5: Assemble Passenger Side
6. Lastly, go ahead and snug up both sides using the 5mm Allen wrench and
your 10mm socket. Just past snug will do fine.
That’s it! You should be all set to go. Check the assembly periodically to make
sure everything is still snug.
Long Bolt
Small Washer
Tall Standoff