Mueller Snap Lock (MSL) - Manual (Page 41)

41
Installation Steps: (use only with floating eave)
1. Apply butyl tape sealant to the panel, to accommodate the high side eave trim and end dam.
2. Apply end dam and attach using 1 ½” woodgrip screws on 4” centers.
3. Seal the end dam sides with tube sealant.
4. Apply butyl tape sealant to the top of the end dam.
5. Attach High side eave trim to the end dam using #14 x 7/8 lap screws on 6” centers as shown.
Mueller Snap
Lock Panel
Tape Sealant
End Dam
#12 1 1/2" Woodgrip Screw
Tube Sealant on
Vertical Edges
Tape
Sealant
#14 x 7/8" Lap
Tek Screw
High Side
Eave Trim
#12 1 1/2"
Woodgrip
Screw
Wood Deck
Underlayment
FIXED HIGH SIDE EAVE
|
WOOD DECK