JB Conversions 2307 LoMax 300 User Manual
Page 11
Advertising
21)
Depress the detent ball with a punch while pushing the rail through the
housing (Fig.20). Push the rail forward until 4-11/16” of the rail remains
exposed on the outside of the housing. Do not rotate the rail while
performing this step.
Fig.20
22)
Insert the pill-shaped slider plugs into the horizontal bores as shown
(Fig.21). Push them as far inward as they will go. They should seat in the
pockets of the 1
st
rail. You should be able to look through the bore (for the
2
nd
rail) and see no obstruction caused by the “pills”.
Fig.21
Advertising