Apple Color StyleWriter Pro - Manual (Page 56)

m
Try to recover any torn or damaged pieces of paper from the printer.
See “Paper Is Jammed,” earlier in this chapter.
m
Take the paper out of the sheet feeder and check it.
Load only one kind of media into the sheet feeder at a time.
Try flipping the stack over to print on the other side (most paper has one
side that prints better).
Fan the paper to make sure sheets don’t stick together.
Make sure none of the sheets are curled, bent, or dog-eared.
Make sure the edges of the stack line up evenly.
Make sure envelopes are installed correctly. The flaps should be down,
each edge should be well creased, and no air should be trapped in the
envelopes.
When loading back-print film, put a sheet of plain paper at the back of the
stack.
When loading transparencies, orient the shiny side toward you. The edge
where the paper and the transparency are joined should be at the bottom.
The Color StyleWriter Pro won’t print a particular document
If you attempt to print a document and no page is printed, try the following:
m
Check for messages on your Macintosh screen.
m
Check the printer.
Does it have paper? (To load paper, see Chapter 2.)
Is the paper jammed? (To clear a jam, see “Paper Is Jammed,” earlier in
this chapter.)
m
Repeat the printing process.
Sometimes problems go away when you try to print your document again.
51 Troubleshooting