Apple Color StyleWriter Pro - Manual (Page 60)

Printing appears on only part of the paper
Check the paper size you selected in the Page Setup dialog box.
You may need to clean the print head or replace an ink cartridge, as explained
in Chapter 4.
A page prints off center or images are out of place
This problem may be the result of one of the following conditions:
m You have selected the wrong page size in the Page Setup dialog box.
m The margins are set incorrectly in the document you are printing.
m Paper is not placed properly in the paper tray. See “Paper or Envelopes
Feed Improperly” earlier in this chapter.
m You are not using recommended printing materials.
m You are printing an 8-inch-wide image (the maximum the printer allows).
The document’s left margin will be smaller than the right one.
Text lines up in columns on the screen but not when it prints
You may have used spaces (rather than tabs) to line up the text. Because
printers interpret spaces differently than does the screen, the text may fail to
line up when you print it. Try replacing the spaces with tabs.
Black areas have a reddish tint
Try selecting Best quality in the Print dialog box or selecting Patterns in the
Color Options dialog box.
Also try turning on ColorSync with the Photographic matching method in the
Color Options dialog box.
Colors don’t look right on the printed page
Try the following:
m Turn off the printer and check to see if you’ve run out of ink.
m Make sure that ColorSync is turned on and that the appropriate matching
methods are selected in the Color Options dialog box.
m Do not select Emphasize Black in the Color Options dialog box.
55 Troubleshooting