Apple WaveBurner 1.6 - Manual (Page 51)

To insert a track start marker
1 Click the Track Start Marker button (the purple marker button to the left of the Transport
buttons).
Track Start Marker button
2 Click the Marker bar (above or below the region) at the position you want to insert the
track start marker.
A track start marker and corresponding pause start point are inserted at the clicked
position. To change the length of the pause that precedes the track start point, move the
left portion of the marker (pause start point) to the left.
Index markers indicate submarkers, which are specific time positions within a track. You
should note that not all CD players can recognize index points.
To insert an index marker
1 Click the Index Marker button (the orange marker button to the left of the Transport
buttons).
Index Marker button
2 Click the Marker bar (above or below the region) at the position you want to insert the
index marker.
Markers are always “attached” to a region. This ensures that markers retain their relative
positions. In other words, if the position of a region on the CD is moved at a later stage
of production, markers attached to that region are moved with it, while markers attached
to the previous region retain their absolute position on the CD. If you insert a marker at
a location where two regions overlap, you can determine which region you want to attach
the marker to by placing it in the Marker bar that is closest to the region in the Wave
View area.
To toggle between marker tools
µ
While pointing at the Marker bar, hold Command to temporarily alternate between the
track and index marker tools.
51 Chapter 5 Working with Markers