Apple Xserve (Early 2008) DIY Procedure for Logic Board User Manual
Page 17
Advertising
Xserve (Late 2006/Early 2008) Logic Board Replacement Instructions
17
Following the order shown, loosen the nine thumbscrews that secure the logic board to the
5.
enclosure.
Note: The thumbscrews are captive; you cannot remove them.
Grasping the logic board only by its expansion card riser and edge as shown, move it
6.
forward and up slightly to release it from the rear port openings in the enclosure.
Remove it from the Xserve.
7.
Advertising