Processor heat sinks – Apple Xserve (Early 2008) DIY Procedure for Logic Board User Manual
Page 9
Advertising
Xserve (Late 2006/Early 2008) Logic Board Replacement Instructions
9
Processor Heat Sinks
Note: Server configurations with a single processor have a regular heat sink and a blank heat sink
installed. The blank heat sink is silver colored (as shown below) and should not be removed
except when replacing a logic board.
Loosen the four screws securing the heat sink in the order indicated below. If two copper-
1.
colored heat sinks are installed, you must remove both heat sinks.
Advertising