Apple Xserve Intel (Late 2006) Service Parts Kit User Manual
Page 11
Advertising
11
3
Install the airflow duct and fasten the five screws that hold it in place.
Note:
Be sure you route the backplane cable and the front panel cable through the
channel on the underside of the duct, as shown in the illustration.
4
Slide the Xserve top cover into place and tighten the two thumbscrews at the back.
5
Lock the enclosure and return the Xserve to the rack.
6
Unlock the enclosure and reconnect the cables and power cords.
The Xserve is now ready to start up.
Airflow duct
Captive screws
Front panel cable
Support on
airflow duct
Backplane cable
Tab on airflow duct
Power supply
Advertising