Apple Shake 4 New Features - Manual (Page 40)

40 Chapter 2 Major Features and New Nodes
Convert Parameters
The Convert mode has the following parameters:
InputFrameRate
Specify the original frame rate of the input media here. This parameter is also a subtree
with two additional subparameters.
InputFrameInterlaced
If the input media is video, enable this parameter if it’s interlaced.
InputFrameDominance
If the input media is interlaced, specify the field dominance here.
OutputFrameRate
Specify the output frame rate here for format conversion. This parameter is a subtree
with two additional subparameters.
OutputFrameInterlaced
If you want interlaced video output, turn this parameter on. Leaving it off results in
Shake outputting progressive-scan (non-interlaced) media.
OutputFrameDominance
If OutputFrameInterlaced is turned on, specify the field dominance of the output
image here.