Setting computer audio volume – Apple Remote Desktop 3.1 User Manual
Page 132
132
Chapter 8
Administering Client Computers
To synchronize client computer clocks:
1
Select a computer list in the Remote Desktop window.
2
Select one or more computers in the selected computer list.
3
Choose Manage > Send UNIX Command.
4
Use the provided Templates for Send UNIX Command to set the time server (see “Send
UNIX Command Templates” on page 146 for more information).
a
Select System Setup > Network Time from the Template pop-up menu.
b
Click Send.
c
Select System Setup > Network Time Server from the Template pop-up menu.
Change the time server from time.apple.com to whichever time server you want, if
desired.
5
Alternatively, manually enter the UNIX command.
a
Type or paste the following UNIX command:
systemsetup -setusingnetworktime on -setnetworktimeserver <NTP server
address>
b
Set the user permissions for this command to be sent as the user “root.”
6
Click Send.
Setting Computer Audio Volume
You may want to standardize or otherwise configure the output volume of your
computers. You could use this to silence a lab of computers all playing music, or turn
up the volume on a single remote computer for a user’s benefit. You can also set the
alert volume separately from the output volume and input volume. Additionally you
can set “output muted.” Muting the volume causes the computer to remember what
the previous volume level was and return to it when the sound is enabled again.
Setting computer audio volume requires the use of Apple Remote Desktop’s Send UNIX
Command feature, AppleScript, and the command-line tool
osascript
Commands” on page 146 for more information. See AppleScript’s StandardAdditions
dictionary for information about using this tool.
To set a computer’s audio volume:
1
Select a computer list in the Remote Desktop window.
2
Select one or more computers in the selected computer list.
3
Choose Manage > Send UNIX Command.
4
Use the provided Templates for Send UNIX Command to set the computer volume (see
“Send UNIX Command Templates” on page 146 for more information).
a
Select Miscellaneous > Volume On from the Template pop-up menu.
b
Set the desired volume level in the Send UNIX Task dialog.