Lukas SC 557 User Manual
Page 18
18
7.4 Pulling (combi tools only)
7.5 Squeezing (combi tools only)
You may only use LUKAS chain sets for pulling purposes.
Before the pulling process can be performed, ensure that the bolt and hook fi t correctly to
prevent the chain from slipping.
Only chain sets in perfect condition may be used! The pull chains are to be inspected at least
once per year by an expert!
See separate operating instructions for the relevant LUKAS chain set in order to
correctly attach, affi x and use the chain sets.
The connection pieces of the LUKAS chain
sets are affi xed to the boreholes A on the
blades using load bolts (see fi gure, right).
Chain sets:
SC 357:
KSV 8
for SC 557:
KSV 13
A
Basically, squeezing can only be carried out in the area of the tips (see fi gure below).
Squeezing area