Technical data, 1 cutters – Lukas SC 557 User Manual
Page 40
![background image](/manuals/548864/40/background.png)
40
Since all values are subject to tolerances, minor differences may occur between the data on
your equipment and the data in the following schedules!
12. Technical Data
12.1 Cutters
*
1 MPa = 10 bar
**
Necessary volume of hydraulic fl uid in the hydraulic unit to operate the unit
(differential volume on piston / rod side)
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from LUKAS on request.
type
S 120
ref.no.
112001000
81-20-10
(172001000)
dimensions l x w x h
(w/o connection hoses)
[mm]
346 x 130 x 87
[in.]
13.6 x 5.1 x 3.4
max. cutting opening
[mm]
53
[in.]
2.1
max. cutting force
(rear end of the cutting
surface)
[kN]
183
[lbf.]
41140
weight incl. hydraulic fl uid
[kg]
4,3
[lbs.]
9.5
max. operating pressure
[Mpa] *
70
[psi.]
10000
min. needed volume
of hydraulic fl uid
[l] **
0,02
[gal.-US]
0.005
coupling system
quick-disconnect-
coupling
mono-coupling
classifi cation acc. to DIN EN 13204
AC53B-4
classifi cation acc. to NFPA 1936
A4/B3/C2/D3/E3