Lukas SC 557 - Manual (Page 27)

27
10.3.3 Replacing blades, protective covers and handles on the cutter S700
A
B
B
C
C D
Work steps:
1. First of all, carefully clean the rescue equipment.
2. Next, close the blade arms so that the tips are almost touching.
Components to be
replaced
Required work steps
Protective cover 1. - 3. and 8.
Pivot bolt 1. - 5. and 8.
Handle 1. - 6. and 8.
Blade 1. - 7. and 8.
3. Remove the fi xing screws “A” and
remove the protective cover “B” and the
cover caps “C”.