Synergy 4040 - Synergy Sit Shower Shave Kit User Manual
Page 13
Advertising
13) Next, unspool the 50 ft bundle of clear fiber reinforced 1/2” ID hose included in the kit. This hose needs
to be cut into two pieces. One length which will be used between the water source and pump. With the
other length used between the pump and heat exchanger. Keep this in mind when cutting the hose.
We recommend cutting the hose to result in one piece at 40 ft, and one piece at 10 ft. The
result should be two pieces of hose as shown below.
Advertising