Synergy 4040 - Synergy Sit Shower Shave Kit - Manual (Page 16)

with. Additionally, use some form of lubricant on the barb fitting and press it into the end of the hose.
As this end will be under high heat and pressure, use a hose clamp as shown below.
18) Assembly of the shower is now complete. The last step to tackle before use is the wiring of the pump.
Wire the pump as desired.
The 12V pump has an average amperage draw of 3 amps and a max draw of 7 amps.
Use a 10 amp fuse between your power source and switching mechanism.