Synergy 4040 - Synergy Sit Shower Shave Kit User Manual
Page 14
Advertising
14) Attach one of the 1/2” male barb pipe fittings which are included with the pump kit to one end of each
piece of hose. Secure with a hose clamp provided in the kit.
15) On the opposite end of the longer piece of hose. Attach the stainless suction strainer. This is a tight fit,
so heating the hose under warm water or using some water soluble lubricant for installation is helpful.
No hose clamp is needed on this end.
Advertising