Synergy 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit User Manual
Page 21
Advertising
32. On the underside of the dash, remove the 7mm bolt next to the OBD port.
33. Remove the speaker from the driver’s side. There are 2 outer 7mm bolts and one
10mm on the inner underside of the dash which secure the speaker pod to the dash.
Do not forget to disconnect the wiring from the speaker pod.
Remove the speaker by pulling the bottom of the dash out until
there is sufficient clearance to get the speaker pod out.
Advertising