Synergy 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit User Manual

Page 58

Advertising
background image

75. Steps 73-77 cover stock rocker guard fitment. Other rocker guards may need to be

trimmed in specific areas in order to clear cage tie ins.

76. Slight trimming of the front body mount will be necessary. Begin by installing the

rocker and mark what area needs to be trimmed on the front mount. See img below.

77. Remove rocker guard and trim as needed, approximately  .25”  wide and 1.25”  long.    

See image below.

Advertising