IKA RV 8 FLEX - Manual (Page 20)

20
Page
EC - Declaration of conformity 20
Explication of warning symbols 20
Safety instructions 20
Correct use 23
Unpacking 23
Useful information 24
Setting up 24
Drive RV 8
Glassware
Hose system
Heating bath
Commissioning 29
Assembling the stand pillar RV 8.1 30
Maintenance and Cleaning 31
Accessories 31
Error Codes 34
Technical data 34
Solvent table (excerpt) 35
Warranty 35
Explication of warning symbols
EC - Declaration of conformity
We declare under our sole responsibility that this product corresponds to the regulations 2006/95/EC, 98/37/EC and 2004/108/EC and
conforms with the standards or standardized documents EN 61010-1, -2-051; EN 12100-1, -2; EN 60204-1 and EN 61326-1.
Safety instructions
For your protection
• The safety lift operates at power failure and
when the device is switched off. It is designed
to raise itself with the glassware attached.
Therefore, please note that the lift without
glass assemblies goes up quickly due to the
reduced weight.
• Read the operating instructions completely before
starting up and follow the safety instructions.
• Keep the operating instructions in a place where they can be
accessed by everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations. When working
under a vacuum in particular !
• Wear your personal protective equipment in accordance with
the hazard category of the medium to be processed. There may
be a risk of:
- splashing liquids,
- body parts, hair, clothing and jewellery getting caught,
- injury as a result of glass breakage.
EN
Contents
DANGER
CAUTION
WARNING
This symbol identifies information that is of vital importance for protecting your health and
safety. Disregarding this information may lead to health impairment and injuries.
This symbol identifies information that is of vital importance for the technically correct func-
tioning of the system.
Disregarding this information may result in damage to the instrument or to system components.
This symbol indicates information which is important for proper use and ensuring that the op-
erations of the instrument are performed efficiently.
Failure to observe this information may result in inaccurate results.
Danger - Reference to exposure to a hot surface!
General hazard.
DANGER