IKA RV 10 control FLEX User Manual
Page 40
Advertising
41
032010
dT
RS 232
RV10.4003
Pump control
RV10.5001
RV10.4001/2
RV10.4003 Valve
Fig. 20
Schematic view of connections (rear view)
Insert the valve connector cable (RV 10.5001 or RV 10.4001/2 resp. RV 10.4003 Valve) resp. the network cable (RV 10.4003 pump control) ) into the
appropriate socket (fig. 20).
Connect the pressure sensor to the Woulff bottle and the Woulff
bottle to the vacuum connector on the condenser using the va-
cuum hoses supplied. Please note that the vacuum must always
be connected to the highest connection point on the condenser
(fig. 21).
Fig. 21
Advertising
This manual is related to the following products: