Eppendorf TransferMan4 r - Manual (Page 58)

58
Operation
TransferMan
® 4r
English (EN)
6.5 Changing the sample
6.6 Changing the size of the working range
6.6.1 Change parameters using the selection dial
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.

Do not reach into the movement range of the modules.
1. Press the home key to move the capillary
out of the working range.
2. Swing the X-module backwards.
3. Change the sample.
4. Swing the X-module back.
5. Press the home key to move the capillary
back into the working range.
1. Press the key for the required working
range on the control panel.
2. Turn the selection dial to change the
value of the working range.
menu
fine fine
coarse