Document Outline

• TransferMan® 4r
• Table of contents
• 1 Operating instructions
  • 1.1 Using this manual
  • 1.2 Danger symbols and danger levels
    • 1.2.1 Danger symbols
    • 1.2.2 Danger levels
  • 1.3 Symbols used
• 2 Product description
  • 2.1 Delivery package
    • 2.1.1 Tools
    • 2.1.2 Accessories
  • 2.2 Features
  • 2.3 Main illustration
    • 2.3.1 Motor module
    • 2.3.2 Control board
  • 2.4 Control panel
  • 2.5 Joystick
    • 2.5.1 Proportional range
    • 2.5.2 Dynamic range
    • 2.5.3 Direction of movement of the joystick
    • 2.5.4 Direction of movement of the rotating wheel
    • 2.5.5 Joystick key functions
  • 2.6 Working range
  • 2.7 Resulting speed
• 3 Safety
  • 3.1 Intended use
  • 3.2 Warnings for intended use
  • 3.3 Warning signs on the device
  • 3.4 Information on product liability
• 4 Installation
  • 4.1 Preparing installation
    • 4.1.1 If there is any damage, make a claim
    • 4.1.2 Delivery incomplete
    • 4.1.3 Microscope adapter assembly
  • 4.2 Selecting the location
  • 4.3 Mounting overview
    • 4.3.1 Module (X, Y, Z)
    • 4.3.2 Z-module holder
    • 4.3.3 Slider
    • 4.3.4 Angle head
    • 4.3.5 Swivel joint
  • 4.4 Mounting the motor module
    • 4.4.1 Mounting the Z-module
    • 4.4.2 Mounting the Y-module
    • 4.4.3 Mounting the X-module
    • 4.4.4 Mounting the angle head
  • 4.5 Inserting the capillary holder into the angle head
  • 4.6 Inserting the capillary into the capillary holder
    • 4.6.1 Inserting Femtotips
  • 4.7 Setting the injection angle
  • 4.8 Aligning the motor module
    • 4.8.1 Aligning the height
    • 4.8.2 Aligning the depth
    • 4.8.3 Aligning the width
    • 4.8.4 Aligning the angle head
  • 4.9 Entering mounting parameters
    • 4.9.1 Microscope and adapter
    • 4.9.2 Motor module
    • 4.9.3 Angle head
  • 4.10 Converting the swivel joint for left side mounting
  • 4.11 Converting the angle head for left side mounting
  • 4.12 Connect the motor module to the control board
  • 4.13 Setting installation parameters
    • 4.13.1 First set-up wizard
  • 4.14 Connecting an external device
    • 4.14.1 Connecting the FemtoJet
    • 4.14.2 Connecting the PiezoXpert
    • 4.14.3 Connecting the computer
    • 4.14.4 Connecting two devices
• 5 Software
  • 5.1 Display
    • 5.1.1 Application display
    • 5.1.2 Display of coordinates
    • 5.1.3 Menu display
  • 5.2 Applications
    • 5.2.1 Application parameters
    • 5.2.2 Application – Cell transfer
    • 5.2.3 Application – ICSI
    • 5.2.4 Application – DNA injection
    • 5.2.5 Application – Basic
    • 5.2.6 Application – My application
  • 5.3 Main menu
  • 5.4 Navigating the menu
    • 5.4.1 Entering or changing parameters
• 6 Operation
  • 6.1 Switching the device on or off
    • 6.1.1 Switching on the device
    • 6.1.2 Switching the device off
  • 6.2 Activating or deactivating the control board
    • 6.2.1 Activating the control board
    • 6.2.2 Deactivating the control board
  • 6.3 Defining the start screen
    • 6.3.1 Defining the application
    • 6.3.2 Defining the selected application
  • 6.4 Replacing the capillary
    • 6.4.1 Manually positioning the capillary
    • 6.4.2 Automatically positioning the capillary
  • 6.5 Changing the sample
  • 6.6 Changing the size of the working range
    • 6.6.1 Change parameters using the selection dial
    • 6.6.2 Changing parameters in the menu
  • 6.7 Shifting the movement range of the capillary
    • 6.7.1 Extending the movement range into the dynamic range
    • 6.7.2 Uncoupling and resetting the joystick
  • 6.8 Capillary positions
    • 6.8.1 Saving a position
    • 6.8.2 Move to the position using the softkey
    • 6.8.3 Move to the position using the joystick button
    • 6.8.4 Deleting a stored position
    • 6.8.5 Overwriting a stored position
  • 6.9 Vertical limits
    • 6.9.1 Defining the lower limit
    • 6.9.2 Deleting the lower limit
    • 6.9.3 Defining the upper limit
    • 6.9.4 Deleting the upper limit
  • 6.10 Horizontal limit
    • 6.10.1 Defining the horizontal limit
    • 6.10.2 Deleting the horizontal limit
  • 6.11 Speed function
    • 6.11.1 Speed menu and parameters
    • 6.11.2 Setting the parameter for Speed
  • 6.12 Step injection function
    • 6.12.1 Step injection menu and parameters
    • 6.12.2 Executing the Step injection function
  • 6.13 Home function
    • 6.13.1 Home menu and parameters
    • 6.13.2 Setting the parameter for Home
    • 6.13.3 Move the capillary out with the home key
    • 6.13.4 Move the capillary back with the home key
    • 6.13.5 Setting the offset.
    • 6.13.6 Terminate the home function.
  • 6.14 Clean function
    • 6.14.1 Clean menu and parameters
    • 6.14.2 Setting the parameter for Clean
    • 6.14.3 Execute the Clean function
    • 6.14.4 Terminate the Clean function.
  • 6.15 PiezoXpert function
    • 6.15.1 PiezoXpert menu and parameters
    • 6.15.2 Execute the PiezoXpert function
  • 6.16 Installation function
    • 6.16.1 Installation menu and parameters
    • 6.16.2 Installation parameters
    • 6.16.3 Control board parameters
    • 6.16.4 Joystick parameters
    • 6.16.5 Module parameters
  • 6.17 Function function
    • 6.17.1 Function menu and parameters
    • 6.17.2 Executing Zero coordin.
    • 6.17.3 Executing Center motors
    • 6.17.4 Executing User default
  • 6.18 Softkeys function
    • 6.18.1 Softkeys menu and parameters
    • 6.18.2 Execute Softkeys
    • 6.18.3 Execute Joystick key
  • 6.19 Change appl. function
    • 6.19.1 Change appl. menu and parameters
    • 6.19.2 Defining the selected application as the start screen
    • 6.19.3 Defining the application as the start screen
  • 6.20 Service function
    • 6.20.1 Service menu and parameters
    • 6.20.2 Execute the Selftest function
  • 6.21 Resetting parameters to the factory settings
    • 6.21.1 Perform reset
    • 6.21.2 Carrying out a reset in the menu
  • 6.22 Remote computer control of the TransferMan 4r
• 7 Troubleshooting
  • 7.1 General errors
    • 7.1.1 Motor module
    • 7.1.2 Capillary
    • 7.1.3 Control board and display
    • 7.1.4 Joystick
    • 7.1.5 Software and parameters
  • 7.2 Error messages
    • 7.2.1 Warnings
    • 7.2.2 Error
• 8 Maintenance
  • 8.1 Replacing fuses
  • 8.2 Cleaning
  • 8.3 Service and maintenance
  • 8.4 Disinfection/decontamination
• 9 Technical data
  • 9.1 Power supply
  • 9.2 Interfaces
  • 9.3 Ambient conditions
• 10 Transport, storage and disposal
  • 10.1 Storage
  • 10.2 Decontamination before shipment
  • 10.3 Transport
  • 10.4 Disposal
• 11 Ordering Information
  • 11.1 TransferMan 4r
  • 11.2 Accessories for TransferMan 4r
  • 11.3 Tools for TransferMan 4r
  • 11.4 Microscope adapter
  • 11.5 Accessories for adapters for microscope
  • 11.6 Capillaries for research applications
  • 11.7 Capillaries
  • 11.8 Universal capillary holder and accessories
  • 11.9 CellTram and accessories
  • 11.10 FemtoJet
  • 11.11 FemtoJet express
  • 11.12 Accessories for FemtoJet/FemtoJet express
  • 11.13 PiezoXpert
• Index
• EC Conformitiy Declaration
• Evaluate your manual