JLG 260MRT Parts Manual - Manual (Page 147)

3121802 260MRT 7-23
SECTION 7 ELECTRICAL
215G 4460424 1 Plug, Male - 2 Position
4460267 2 Pin, Male
215H 4460539 1 Connector, Female - 2 Position
4460465 3 Socket, Female
215J 4460884 1 Connector, Female - 4 Position
4460465 4 Socket, Female
3990010 1 Diode, 6 Amp
216 to 221 Not Used
222 4923293 1 Harness, Ground Control Box A
222A 4460434 1 Plug, Male - 15 Position
4460268 13 Socket, Female
222B 4460885 1 Plug, Female - 4 Position (Not used for this application)
4460464 4 Socket, Female
223 Not Available 1 Harness, Tilt (Part of Dual Axis Tilt Sensor p/n 4000006)
223A 4460321 1 Plug, Male - 6 Position
4460267 4 Pin, Male
Ref. STANDARD HARNESS COMPONENTS
301 7023183 1 Harness, Engine (Refer to Kubota Dealer)
301A 7023179 1 Plug, Male - 8 Position (Yellow)
7023182 8 Pin, Male
301B 7023178 1 Plug, Male - 8 Position (White)
7023182 8 Pin, Male
301C 7023180 1 Bulkhead, Electrical Connector (White)
301D 7023181 1 Bulkhead, Electrical Connector (Yellow)
302 4922428 1 Harness, Lift Down
1060680 16.5ft/5m Cable, Electrical - 18/2
302A 4460499 1 Connector, DIN
302B 4460465 2 Socket, Female
303 4922630 1 Elevation Switches Harness B
1060680 9ft/2.7m Cable, Electrical - 18/2
303A Use 4360548 2 Switch, Limit
303B 4460968 2 Connector, Strain Relief
303C 4460465 2 Socket, Female
304 Not Available 1 Harness, Controller (Part of Electrical Assembly)
304A 4460265 1 Plug, Male - 9 Position
4460268 8 Socket, Female
Ref. OPTIONAL HARNESS COMPONENTS
401 Not Used
402 4922439 1 Beacon Harness
1060680 6ft/1.8m Cable, Electrical - 18/2
402A 2400056 1 Fuse - 5 Amp
4460044 1 Fuseholder
402B 4460248 3 Terminal, Butt
402C 4460268 2 Socket, Female
4460320 1 Plug, Male - 2 Position
FIGURE 7-5. ELECTRICAL COMPONENTS INSTALLATION (S/N 0200141689 TO PRESENT)
ITEM # PART NUMBER QTY. DESCRIPTION REV.