JLG 260MRT Parts Manual - Manual (Page 74)

3-4 260MRT 3121802
SECTION 3 SCISSORS ARMS
31 3422838 2 Pin, Bottom Pivot
32 3422714 1 Pin, Cylinder
33 3422839 4 Pin, Pivot
34 3422815 1 Pin, Cylinder
35 3422840 16 Pin, Pivot
36 Not Used
37 3760387 A/R Ring, Snap
38 3760419 4 Ring, Snap
39 4240125 2 Strap, Nylon
40 4240128 1 Strap, Safety Prop
41 to 43 Not Used
44 4711500 16 Flatwasher 5/16in Thin
45 4711600 24 Flatwasher 3/8in Thin
46 4740333 4 Washer
47 4740438 A/R Washer
48 4846024 1 Prop, Safety
49 Not Used
50 3020022 A/R Grease, White Lithium (Not Shown)
51 4420037 A/R Tape, Insulation (Not Shown)
52 4922428 1 Harness, Lift Down (Not Shown - See Section 7 for
Breakdown)
53 4922915 1 Harness, Load Sense (Not Shown)
— — — — — — — — — —
100 1 Arm Kit Options (Not Shown):
2902259 Arm Assembly (Includes Item 1-8
Arm Sub-Assembly Kits without Load Sensing (Includes
Items 1-18, 20-27, 29, 30, 32-49, 51, 52, Arm Cables &
Hoses)
2902260 Standard Machine
1001118679 Machine with Level at 6° Slope (Australian Spec Option)
Arm Sub-Assembly Kit with Load Sensing (Includes Items
1-18, 20-27, 29, 30, 32-49, 51, 52, 53, Arm Cables &
Hoses)
1001110782 Standard Machine
1001118681 Machine with Level at 6° Slope (Australian Spec Option)
FIGURE 3-1. SCISSOR ARMS INSTALLATION (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.