JLG 260MRT Parts Manual - Manual (Page 151)

3121802 260MRT 7-27
SECTION 7 ELECTRICAL
406 4923136 Ref. Harness, Adapter - Auto Level 2/E
406A 4460894 1 Plug, 6 Position
3730124 3 Resistor, 300 OHM
4460899 1 Terminal, 6 Position
4460465 6 Socket, Female
4460464 6 Pin, Male
406B 4460933 1 Plug, 12 Position
4460465 3 Socket, Female
406C 4460892 1 Terminal, 6 Position (Buss Bar)
4460894 1 Plug, 6 Position
4460465 5 Socket, Female
406D 4460933 1 Plug, 12 Position
4460465 12 Socket, Female
4460898 1 Plug, 12 Position (4 Buss Bar)
406E 4460465 4 Socket, Female
407 4923135 Ref. Harness, Analyzer - Auto Level B
4060128 1ft.0.3m Cable, Control
4460761 1 Housing, Female 4 Position
4460227 3 Pin, Male
4460465 3 Socket, Female
408 4923137 Ref. Harness, Proximity A
1060902 8ft/2.4m Cable, Electrical 18/2
4460465 4 Socket, Female
4460891 1 Housing, 2 Position
409 to 410B Not Required
Ref. TOOLS
501 7002821 1 Crimper (For Wire to Pin/Socket Connections)
502 7002823 1 Extractor (For Removal of Pin/Socket from Connectors)
503 4460467 1 Extractor, Pin (Blue 16-18 Gauge) (For Removal of Pin/Socket
from Connectors)
4460510 1 Extractor, Pin (Yellow 12-14 Gauge) (For Removal of Pin/Socket
from Connectors)
504 7002828 1 Stripper, Wire
FIGURE 7-5. ELECTRICAL COMPONENTS INSTALLATION (S/N 0200141689 TO PRESENT)
ITEM # PART NUMBER QTY. DESCRIPTION REV.