JLG 260MRT Parts Manual - Manual (Page 34)

1-28 260MRT 3121802
SECTION 1 FRAME
32 4751600 6 Flatwasher 3/8in Regular (S/N 0200155061 to Present)
Ref. Note: The following items used on Machines with Level at 6°
Slope Only (Australian Spec Option). Not Shown - Located on
Item 22 Valve.
33 2220343 1 Fitting, Straight
34 2220396 1 Fitting, Straight
35 2220651 1 Fitting, Straight
36 4640216 1 Valve, Colorflow
37 0100020 A/R Sealant
Ref. LEVELING JACK ASSEMBLY
4210017 Ref. All Machines except Machines with Level at 6° Slope
Software A
4210011 Ref. Machines with Level at 6° Slope (Australian Spec Option) B
101 0641824 4 Bolt 1/2in-13NC x 3in
102 0641828 4 Bolt 1/2in-13NC x 3-1/2in
103 2 Bracket, Jack Cover Options:
0903165 Bracket used with 26in/66.5cm H Cover (All Machines except
Machines with Level at 6° Slope)
0903054 Bracket used with 31.75in/80.6cm H Cover (Machines with
Level at 6° Slope) (Australian Spec Option)
104 2 Jack Cylinder Assembly (See Section 5 for Breakdown)
1684220 Cylinder - 33.7in/85.6cm Retracted Length (All Machines
except Machines with Level at 6° Slope)
1684406 Cylinder - 39.2in/99.5cm Retracted Length (Machines with
Level at 6° Slope) (Australian Spec Option)
105 2110606 2 Fitting
106 2110808 2 Fitting
107 2220883 2 Fitting, Plug
108 3311805 8 Locknut 1/2in-13NC
109 3760348 2 Ring, Retaining
110 3841564 2 Rod
111 4160116 2 Spring
112 4340885 1 Weldment, Leveling Jack
113 4360518 2 Switch, Pressure Transducer
114 4641238 2 Valve, Solenoid Directional
7024497 1 Cartridge (1 Per Cartridge)
7024501 1 Coil (1 Per Cartridge)
7024502 1 Seal Kit - 4641238 Valve (1 Per Cartridge)
7024506 1 Coil Nut, Kit - 4641238 Valve (1 Per Cartridge)
115 4711800 4 Flatwasher 1/2in Thin
4641374 Ref. LEVELING JACK CONTROL VALVE ASSEMBLY B
201 2110608 1 Fitting (S/N 0200128985 to S/N 0200155061)
202 2110808 1 Fitting
203 2220237 3 Fitting, Plug
204 2220238 3 Fitting, Plug
FIGURE 1-8. LEVELING JACKS AUTO LEVEL INSTALLATION (AUSTRALIAN SPEC S/N
0200128985 TO PRESENT & CE SPEC S/N 0200141689 TO PRESENT) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.